Camlock ball valves are valves that are used in fluid power circuits, and as a way to stop large amounts of fluid from flowing back into the vessel. They function by quickly opening when a high-pressure pump draws in fluid, then shutting off at a momentary pressure.
What is a Camlock Ball Valve?
A ball valve is a component of a water distribution system that controls the flow of water from one point to another. The main use of ball valves is in water distribution systems for use in factories, schools, and office buildings.
Why is it used?
A camlock ball valve is commonly used in water distribution systems because of its high flow rate and resistance to clogging. It can also be used in other applications where high flow rates are required, such as air conditioning and heating systems.
How does it work for us?
There are a few different ways in which a Union Metal camlock ball valve can be used for you, the end user. Some of these ways include: controlling water flow, regulating pressure, and controlling temperature.
When it comes to controlling water flow, camlock ball valves can be used in place of traditional water valves. This is because camlock ball valves have the ability to adjust their flow based on the amount of pressure that is being applied to them. In addition to this, they are also able to handle high pressures and temperatures.
When it comes to regulating pressure, camlock ball valves can be used in applications where you need to maintain a certain pressure. For example, if you are working with hydraulic systems then you will need to maintain a certain pressure in order for the system to work properly. Camlock ball valves can help you do this by allowing you to set the desired pressure and then maintain it.
Finally, when it comes to controlling temperature, camlock ball valves can be very useful. Camlock ball valves have the ability to withstand high temperatures without breaking down. This makes them perfect for applications where you need to keep something hot or cold for a long period of time.
How to use and maintain a camlock ball valve
Ball valves play a big role in controlling water flow and are often used in commercial and industrial settings. Here’s how to use and maintain a camlock ball valve:
- Open the valve by pressing down on the top of the handle. Make sure the retaining clip is properly seated in the groove on the side of the valve body. Do not over-tighten the handle!
- To adjust the stream of water, rotate the handle until you achieve the desired flow rate. Be careful not to over-turn the handle, or you may damage the valve body.
- To close the valve, release the pressure from your hand on top of the handle, and push it up firmly until it clicks into place. Be sure to tighten the retaining clip before using the valve again.
